en nl fr
AIC HA202-PV - 2U high-availability NVME storage system - 24 x NVME 2.5 inch shared by 2 independent high-availability nodes
AIC HA202-PV - 2U high-availability NVME storage system - 24 x NVME 2.5 inch shared by 2 independent high-availability nodes
AIC HA202-PV - 2U high-availability NVME storage system - 24 x NVME 2.5 inch shared by 2 independent high-availability nodes
AIC HA202-PV - 2U high-availability NVME storage system - 24 x NVME 2.5 inch shared by 2 independent high-availability nodes
AIC HA202-PV - 2U high-availability NVME storage system - 24 x NVME 2.5 inch shared by 2 independent high-availability nodes

AIC HA202-PV - 2U high-availability NVME storage system - 24 x NVME 2.5 inch shared by 2 independent high-availability nodes

2U 2-Node high-availability storage server supports 24 hot swap 2.5” drive bays for NVMe SSDs (U.2)

HA202-PV is a 2U 24-Bay NVMe storage server solution that provides high-availability with accelerated performance. HA202-PV comes with two AIC Pavo Server Boards (one board per node), each supporting dual Intel® Xeon® Scalable Processors. Both nodes process I/O, and provide simultaneous and balanced access to the logical devices, which significantly increases overall cluster performance. When failure occurs, the secondary node automatically takes over the devices, client connections, and all processes/services of the system. By eliminating SPOFs (single points of failure) and designed for redundancy and end-to-end data protection, the HA202-PV provides protection from storage system down time and loss of revenue when access to data resources and critical business applications are in-interruptible. Its support of NVMe SSDs allows for super-fast data access, and is optimized for mission-critical, enterprise-level storage applications.

 

Key Features 
• 2U 2-Node high-availability storage server supports 24 hot swap 2.5” drive bays for NVMe SSDs (U.2)
• Optimized for mission-critical, enterprise-level storage applications
• Fully redundant, fault-tolerant system supporting hot swappable controller nodes and storage drives
• Two compute nodes, Active-Active configuration, each supporting two 2nd Gen. Intel® Xeon® Scalable processors
  (Cascade Lake Refresh/Cascade Lake/Skylake)
• 1 x16 PCIe, 1 x8 PCIe and 1 OCP Mezzanine slots per node provide direct links to CPU
• PCIe NTB link between nodes for communication and fail-over

Dimensions (W x D x H)  
• mm : 435 x 911 x 87
• inches : 17.1 x 35.9 x 3.4
Motherboard (per node)
Code Name - Pavo
Processor (per node)
• Intel® Xeon® Scalable Processors (Cascade Lake Refresh/Cascade Lake/Skylake)
• Supports CPU TDP up to 165W
*Please contact AIC Technical Support for more info/details about optimized CPUs and specialized system.
UPI Speeds : 10.4 GT/s, 9.6 GT/s
Socket Type : Socket P0 (LGA-3647 Socket)
Chipset Support (per node)
Intel® Lewisburg C620 series PCH
System Memory (per node)
• 6 x memory channels per CPU, 2 channels with 2DPC + 4 channels with 1DPC
• 16 x DIMM slots support: DDR4 2933/2666/2400MHz
• Intel® Optane™ DC Persistent Memory (Apache Pass) support
Front Panel
System power on/off
LEDs
A :
• Power (Secondary)
• Warning
B :
• Power (Primary)
• Warning
Drive Bays

External : 24 x 2.5" hot swap
Internal: 2 per node x 2.5"

Backplane
1 x 24-port dual loop NVMe backplane
Expansion Slots (PCIe 3.0) (per node)
• 1 x16 slot (FH)
• 1 x16 slot (x8 mode) (FH)
• 1 x OCP Mezzanine card V2.0
*Please contact AIC Technical Support for more info/details about OCP card.
Expander Boards (per node)
2 x 64-port Broadcom/PLX 9765 PCIe switch board
Riser Card (included) (per node)
• RC-PE2U08-TY : 1 x16 PCIe slot + 1 x8 PCIe slot
System BIOS
BIOS Type :
Insyde UEFI BIOS

BIOS Features :
• ACP
• PXE
• WOL
• AC loss recovery
• Serial console redirection
• BIOS Boot Specification
• BIOS Recovery Mode
• SMBIOS
• SRIOV
• iSCSI
• TPM
• PCIe Hotplug
On-board Devices

SATA
Intel® Lewisburg PCH on-chip solution
• 4 x SATA 6.0 Gb/s (by 1 x mini-SAS HD)
• 2 x SATA 6.0 Gb/s (by 2 x SATA 7 pin)
• 5 x SATA 6.0 Gb/s (by Max I/O®)
• RAID 0, 1, 5, 10 support by Intel RSTe

BMC
Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
• Baseboard Management Controller
• Intelligent Platform Interface 2.0 (IPMI 2.0)
• iKVM, Media Redirection, IPMI over LAN, Serial over LAN
• SMASH Support
• HTML5
• Redfish

Network Controllers
• Intel® PCH (Lewisburg) Integrated 10GbE LAN controller with dual SFP+ rear connectors
• Intel® I350 dual-port GbE RJ45 rear connectors
• Realtek RTL8211E for BMC dedicated management port

Graphics
Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
• PCIe VGA/2D Controller
• 1920x1200@60Hz 32bpp

Rear I/O (per node)

LAN:• 2 x 10GbE SFP+
• 2 x GbE RJ45
• 1 x GbE RJ45 dedicated to BMC management

USB:
• 2 x USB 3.0 Type A

VGA:
• 1 x external DB-15 VGA port

Serial Port: 
• 1 x audio jack for COM port

TPM Support
2.0 onboard
Power Supply
1300W 1+1 redundant power supply 80+ Platinum
• AC INPUT : 100-120V,50/60Hz,12A
• DC OUTPUT : 900W
• AC INPUT : 200-240V,50/60Hz,8A
• DC OUTPUT : 1300W
System Cooling (per node)
2 x 60x56mm easy swap fans
Server Management
• IPMI 2.0
• KVM over IP
• Media redirection
• Temperature, fan, voltage, PSU sensor monitor
• System temperature
• System ID / System fail indicator
• Remote Power on/off/reset
• SEL message alarm through mail
• SNMP support
• Intel NM
• HTML5
• Redfish
Environmental Specifications
• Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF)
• Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF)
• Storage operating humidity : 5%~95% non-condensing
Gross Weight (w/PSU & Rail)
• kgs : 43.5
• lbs : 95.9
Packaging Dimensions (W x D x H)
• mm : 615 x 1220 x 338
• inches : 24.2 x 48 x 13.3
Mounting
Standard : 28" tool-less slide rail
Malheureusement, pas de stock local.
Chargement du configurateur ...